HiFlexlinK Precision Interconnect Catalog · 0.50mm to 3.96mm Pitch

Custom JST Wire Harness & Cable Assembly Solutions

HiFlexlinK engineers precision-crimped JST wire harness and JST cable assembly solutions for industrial automation, robotics, LED backlight drivers, LVDS display panels, and electric mobility. From high-current JST XH cable assembly and JST PH cable assembly power leads to 0.50mm micro-coaxial custom JST cables, every JST connector assembly is manufactured with UL-recognized wire and verified via 100% continuity and pull-force inspection.

33
Standard & Hybrid SKUs
0.50–3.96mm
Supported Pitch Range
100%
Continuity & Hi-Pot

/

Engineering Part Identification System

HiFlexlinK Part Number Nomenclature Guide

Every assembly in the HiFlexlinK catalog uses a deterministic HFL- part code encoding connector family, circuit count, centerline pitch, and conductor gauge for rapid BOM verification.

Decoded Example Part Number
HFL-XHP-02P-250-22
HiFlexlinK · JST XHP Series · 2-Pin · 2.50mm Pitch · 22 AWG UL1007 Wire
01 Brand Prefix
HFL

HiFlexlinK factory-crimped, 100% continuity-tested interconnect assembly.

Values: HFL
02 Connector Family
SERIES

Primary housing series such as XH, PH, ZH, SH, SHLP, ACH, NSH, FWG, XSR, or VH.

Values: XHP / SHLP / PHR
03 Circuit Count
PINS

Total contact positions on primary termination (e.g., 06P for 6-pin, 5P7P for multi-end).

Values: 02P – 31P
04 Centerline (×100)
PITCH

Contact centerline spacing in millimeters multiplied by 100 (e.g., 100 = 1.00mm, 250 = 2.50mm).

Values: 050 – 396
05 Conductor Gauge
AWG

UL-rated stranded copper wire or micro-coaxial conductor size in AWG.

Values: 20 – 36
Connector Series Pitch Current Voltage Wire Range Key Mechanical Features Primary Applications
JST FWG / XSR 0.50mm / 0.60mm 0.2A – 0.3A 30V – 50V AC/DC 30 – 36 AWG Ultra-low profile, high-speed LVDS & IDC micro-coax LCD display panels, camera modules, compact robotics
JST SUHR / SHR 0.80mm / 1.00mm 1.0A 50V AC/DC 28 – 32 AWG Space-saving wire-to-board crimp housing Sensor arrays, drones, embedded controllers
JST SHLP / SHJP / NSH 1.00mm 1.0A 50V – 125V 28 – 30 AWG Positive locking latch / thin side-entry profile LED backlight drivers, FCII LCD interfaces, automotive
JST ACH / APSH / 1.25mm 1.20mm – 1.25mm 1.5A – 3.0A 50V – 250V 26 – 32 AWG Disconnectable crimp, Molex 51021 / 51146 cross-compatible PCB power boards, industrial robotics, instrumentation
JST ZH / PH / PHR 1.50mm / 2.00mm 1.0A – 2.0A 50V – 100V 22 – 28 AWG High-box disconnectable wire-to-board headers E-bike batteries, PCB modules, LED lighting systems
JST XH / RE / JH / VH 2.50mm – 3.96mm 2.0A – 13.0A 250V AC/DC 18 – 26 AWG High-retention power & OA equipment wire-to-board Console power harnesses, cooling fans, industrial power

Complete Engineering Lineup

33 Custom JST Wire Harness & Cable Assemblies

Filter by pitch tier or search by HiFlexlinK model, JST housing code, Molex/TE cross-reference, pin count, or AWG wire gauge.

Showing 33 of 33 assemblies
HFL-XHP-02P-250-22 - 2-Pin JST XHP-2 Glued Power Wire Harness, 22AWG UL1007
Standard Pitch · 2.50 mm #01
HFL-XHP-02P-250-22

2-Pin JST XHP-2 Glued Power Wire Harness, 22AWG UL1007

Pitch
2.50 mm
Circuits
2 Pin
Wire Spec
22 AWG (UL1007, Black/Red Glued)
Connector
JST XHP-2 Receptacle Housing
Ratings / Length
3A AC/DC · 250V · -25°C to +85°C · Custom Length
HFL-ACH-02P-120-28 - 2-Pin JST ACH to ACHTR-02V-S Disconnectable Crimp Wire Harness
Micro Pitch · 1.20 mm (1.00mm SHR Option) #02
HFL-ACH-02P-120-28

2-Pin JST ACH to ACHTR-02V-S Disconnectable Crimp Wire Harness

Pitch
1.20 mm (1.00mm SHR Option)
Circuits
2 Pin (2P / 6P Option)
Wire Spec
28–32 AWG (UL1571 Tin-Plated)
Connector
JST ACH / ACHTR-02V-S Receptacle
Ratings / Length
500 mm Standard / Custom · Disconnectable Crimp
HFL-APSH-03P-100-28 - 3-Pin JST APSH Wire-to-Board APSHR-03V-S Wire Harness Assembly
Micro Pitch · 1.00 mm #03
HFL-APSH-03P-100-28

3-Pin JST APSH Wire-to-Board APSHR-03V-S Wire Harness Assembly

Pitch
1.00 mm
Circuits
3 Pin
Wire Spec
28–32 AWG (0.4–0.8mm O.D.)
Connector
JST APSH / APSHR-03V-S
Ratings / Length
500 VAC Withstand · IR ≥100 MΩ · -25°C to +85°C
HFL-SHLP-06P-100-28 - 6-Pin JST SHLP-06V-S-B LED Backlight Cable Wire Harness, 500mm
Micro Pitch · 1.00 mm #04
HFL-SHLP-06P-100-28

6-Pin JST SHLP-06V-S-B LED Backlight Cable Wire Harness, 500mm

Pitch
1.00 mm
Circuits
6 Pin
Wire Spec
28 AWG (UL20064)
Connector
JST SHLP-06V-S-B Low-Profile
Ratings / Length
500 mm Length · Small Assembly Height & Footprint
HFL-SHR-08P-080-28 - 8-Pin JST SHR-08V-S-B to Molex 51021-1000 LVDS PVC Cable Assembly
Ultra-Fine Pitch · 0.80 mm / 1.25 mm #05
HFL-SHR-08P-080-28

8-Pin JST SHR-08V-S-B to Molex 51021-1000 LVDS PVC Cable Assembly

Pitch
0.80 mm / 1.25 mm
Circuits
8 Pin to 12 Pin
Wire Spec
28–32 AWG PVC LVDS
Connector
JST SHR-08V-S-B (SSH-003T) to Molex 51021-1000
Ratings / Length
Custom Length · Precision Crimp Transition
HFL-SHLP-12P-100-28 - 12-Pin JST SHLP-12V-S-B Thin Wire-to-Board Cable Assembly
Micro Pitch · 1.00 mm #06
HFL-SHLP-12P-100-28

12-Pin JST SHLP-12V-S-B Thin Wire-to-Board Cable Assembly

Pitch
1.00 mm
Circuits
12 Pin
Wire Spec
28 AWG
Connector
JST SHL Series (SHLP-12V-S-B)
Ratings / Length
1.0A · 50V AC/DC · Side-Entry Thin Profile
HFL-SHJP-06P-100-28 - 6-Pin JST SHJP-06V-S(HF) to Molex 51021-0500 5-Pin LED Driver Harness
Hybrid Transition · 1.00 mm / 1.25 mm #07
HFL-SHJP-06P-100-28

6-Pin JST SHJP-06V-S(HF) to Molex 51021-0500 5-Pin LED Driver Harness

Pitch
1.00 mm / 1.25 mm
Circuits
6 Pin to 5 Pin
Wire Spec
28 AWG
Connector
JST SHJP-06V-S(HF) to Molex 51021-0500
Ratings / Length
1.0A · 125V · Secure Locking FCII LED Driver
HFL-SHR-07P-100-28 - 7-Pin JST SHR-07V-S-B Wire-to-Board Cable Assembly
Micro Pitch · 1.00 mm #08
HFL-SHR-07P-100-28

7-Pin JST SHR-07V-S-B Wire-to-Board Cable Assembly

Pitch
1.00 mm
Circuits
7 Pin
Wire Spec
28–32 AWG (0.4–0.8mm O.D.)
Connector
JST SHR-07V-S-B
Ratings / Length
1.0A · 50V · 500 VAC Withstand · -25°C to +85°C
HFL-PHR-06P-200-28M - 6-Pin JST PHR-6 (2.00mm) to Molex 51146-0600 (1.25mm) Backlight Cable
Hybrid Transition · 2.00 mm to 1.25 mm #09
HFL-PHR-06P-200-28M

6-Pin JST PHR-6 (2.00mm) to Molex 51146-0600 (1.25mm) Backlight Cable

Pitch
2.00 mm to 1.25 mm
Circuits
6 Pin
Wire Spec
28–32 AWG
Connector
JST PHR-6 (SPH-004T) to Molex 51146-0600 (50641)
Ratings / Length
150 mm (5.9 in) Standard / Custom Length
HFL-SHJP-06P-100-28L - 6-Pin JST SHJP-06V-S to Molex 51021-0500 LCD Panel Harness
Hybrid Transition · 1.00 mm / 1.25 mm #10
HFL-SHJP-06P-100-28L

6-Pin JST SHJP-06V-S to Molex 51021-0500 LCD Panel Harness

Pitch
1.00 mm / 1.25 mm
Circuits
6 Pin to 5 Pin
Wire Spec
28 AWG Insulated Wire
Connector
JST SHJP-06V-S(HF) to Molex 51021-0500 (50079)
Ratings / Length
UL94V-0 · -40°C to +105°C · Custom Length
HFL-PAP-04P-125-28 - 4-Pin JST PAP-04V-S to 5-Pos 1.25mm LCD Backlight Cable Assembly
Hybrid Transition · 2.00 mm / 1.25 mm #11
HFL-PAP-04P-125-28

4-Pin JST PAP-04V-S to 5-Pos 1.25mm LCD Backlight Cable Assembly

Pitch
2.00 mm / 1.25 mm
Circuits
4 Pin to 5 Pin
Wire Spec
28–30 AWG
Connector
JST PAP-04V-S to 5-Pos 1.25mm Low-Profile Housing
Ratings / Length
BB to Innolux 15.6" Backlight Interface · Custom Length
HFL-VH-02P-396-20 - JST B2P-VH to Molex 39-01-2040 4-Pos Console Power Wire Harness
Hybrid Transition · 3.96 mm / 4.20 mm #12
HFL-VH-02P-396-20

JST B2P-VH to Molex 39-01-2040 4-Pos Console Power Wire Harness

Pitch
3.96 mm / 4.20 mm
Circuits
2 Pin to 4 Pin Dual Row
Wire Spec
18–24 AWG Tin-Plated
Connector
JST B2P-VH to Molex 39-01-2040
Ratings / Length
13.0A Max per Contact · -40°C to +105°C
HFL-PH-02P-200-22 - 22AWG JST PH2.0 Connector Cable Harness for E-Bike & Battery Packs
Standard Pitch · 2.00 mm #13
HFL-PH-02P-200-22

22AWG JST PH2.0 Connector Cable Harness for E-Bike & Battery Packs

Pitch
2.00 mm
Circuits
2–6 Pin Configurable
Wire Spec
22–24 AWG
Connector
JST PH 2.0 Series (Thin Disconnectable)
Ratings / Length
2A · 100V · Top/Side Entry PCB Mounting
HFL-HYB-5P7P-125-28 - Custom 5-Pin (1.25mm) to 7-Pin (2.00mm) Wire Harness, UL1061 28AWG
Hybrid Transition · 1.25 mm to 2.00 mm #14
HFL-HYB-5P7P-125-28

Custom 5-Pin (1.25mm) to 7-Pin (2.00mm) Wire Harness, UL1061 28AWG

Pitch
1.25 mm to 2.00 mm
Circuits
5 Pin to 7 Pin
Wire Spec
28 AWG (UL1061, 0.9mm O.D.)
Connector
5P 1.25mm Straight to 7P 2.00mm Right-Angle
Ratings / Length
RoHS · -40°C to +105°C · AC 100V Hi-Pot · 25mm Heat Shrink
HFL-PCB-30P-125-26 - 30-Pin 1.25mm Pitch JST-Style Power Transmission PCB Wire Harness
Micro Pitch · 1.25 mm #15
HFL-PCB-30P-125-26

30-Pin 1.25mm Pitch JST-Style Power Transmission PCB Wire Harness

Pitch
1.25 mm
Circuits
30 Pin
Wire Spec
26–28 AWG
Connector
30P 1.25mm Polyamide (PA) Power PCB Housing
Ratings / Length
1.5A–3.0A/pin · 50–250V · ≥500 Mating Cycles
HFL-PCB-14P-125-26 - 14-Pin 1.25mm Pitch JST-Style Pre-Wired Harness for Robotics & Auto
Micro Pitch · 1.25 mm #16
HFL-PCB-14P-125-26

14-Pin 1.25mm Pitch JST-Style Pre-Wired Harness for Robotics & Auto

Pitch
1.25 mm
Circuits
14 Pin
Wire Spec
26–28 AWG
Connector
14P 1.25mm PA Housing (Tin/Gold Contacts)
Ratings / Length
1.5A–3.0A/pin · 50–250V · -25°C to +85°C
HFL-PCB-12P-125-26 - 12-Pin 1.25mm Pitch JST-Style PCB Power Board Wire Harness
Micro Pitch · 1.25 mm #17
HFL-PCB-12P-125-26

12-Pin 1.25mm Pitch JST-Style PCB Power Board Wire Harness

Pitch
1.25 mm
Circuits
12 Pin
Wire Spec
26–28 AWG
Connector
12P 1.25mm PA Housing (Tin/Gold Contacts)
Ratings / Length
1.5A–3.0A/pin · 50–250V · ≥500 Mating Cycles
HFL-COMB-04P-254-24 - 4-Pin 2.54mm Pitch Combination Wire Harness (280359-0 to CE100F22-2)
Hybrid Transition · 2.54 mm #18
HFL-COMB-04P-254-24

4-Pin 2.54mm Pitch Combination Wire Harness (280359-0 to CE100F22-2)

Pitch
2.54 mm
Circuits
4 Pin
Wire Spec
22–26 AWG
Connector
280359-0 (4P 2.54mm) to CE100F22-2
Ratings / Length
100% Open/Short Test · AC 100V Hi-Pot · IR ≥20 MΩ
HFL-COMB-08P-254-22 - Combination Wire Harness 172157-1 HSG to TE 3-64440-8 Connector
Hybrid Transition · 2.54 mm / 3.96 mm #19
HFL-COMB-08P-254-22

Combination Wire Harness 172157-1 HSG to TE 3-64440-8 Connector

Pitch
2.54 mm / 3.96 mm
Circuits
Multi-Pin Custom
Wire Spec
22–26 AWG
Connector
TE 172157-1 Housing to TE 3-64440-8
Ratings / Length
100% Open/Short Test · AC 100V Hi-Pot · CR ≤5Ω
HFL-PHR-06P-200-24 - 6-Pin JST PHR-6 High-Box Wire-to-Board Cable Harness Assembly
Standard Pitch · 2.00 mm #20
HFL-PHR-06P-200-24

6-Pin JST PHR-6 High-Box Wire-to-Board Cable Harness Assembly

Pitch
2.00 mm
Circuits
6 Pin
Wire Spec
24 AWG
Connector
JST PHR-6 High-Box Series
Ratings / Length
2.0A · 100V · Top-Entry Disconnectable
HFL-RE-05P-254-24 - 2.54mm Pitch JST RE Series Wire-to-Board Harness Assembly
Standard Pitch · 2.54 mm #21
HFL-RE-05P-254-24

2.54mm Pitch JST RE Series Wire-to-Board Harness Assembly

Pitch
2.54 mm
Circuits
5 Pin (Custom 2–20P)
Wire Spec
24 AWG
Connector
JST RE Series Disconnectable
Ratings / Length
2.0A · 250V · Top/Side Entry for OA Equipment
HFL-ZH-04P-150-26 - 4-Pin JST ZH Compact Wire-to-Board Wire Harness, 1.50mm Pitch
Standard Pitch · 1.50 mm #22
HFL-ZH-04P-150-26

4-Pin JST ZH Compact Wire-to-Board Wire Harness, 1.50mm Pitch

Pitch
1.50 mm
Circuits
4 Pin
Wire Spec
26 AWG
Connector
JST ZH Series (ZHR-4 Compact)
Ratings / Length
1.0A · 50V · Low-Profile Top/Side Entry
HFL-FWG-31P-050-30 - 31-Pin JST 31P-FWG-Z-1 0.50mm Pitch LVDS Display Wire Harness
Ultra-Fine Pitch · 0.50 mm #23
HFL-FWG-31P-050-30

31-Pin JST 31P-FWG-Z-1 0.50mm Pitch LVDS Display Wire Harness

Pitch
0.50 mm
Circuits
31 Pin (Single Row)
Wire Spec
30–36 AWG Micro Coax / Discrete
Connector
JST FWG (31P-FWG-Z-1, PA46 Ivory)
Ratings / Length
0.3A · 50V AC/DC · IR 500 MΩ · -25°C to +85°C
HFL-SUHR-03P-080-30 - 3-Pin JST SUHR-03V-S 0.80mm Pitch Low-Profile High-Speed Cable
Ultra-Fine Pitch · 0.80 mm #24
HFL-SUHR-03P-080-30

3-Pin JST SUHR-03V-S 0.80mm Pitch Low-Profile High-Speed Cable

Pitch
0.80 mm
Circuits
3 Pin
Wire Spec
30 AWG (0.47–0.71mm O.D.)
Connector
JST SUHR-03V-S Space-Saving
Ratings / Length
200 VAC Withstand · IR 500 MΩ · -25°C to +85°C
HFL-NSHR-15P-100-28 - 15-Pin JST NSHR-15V-S 1.00mm Pitch Secure-Locking Wire Harness
Micro Pitch · 1.00 mm #25
HFL-NSHR-15P-100-28

15-Pin JST NSHR-15V-S 1.00mm Pitch Secure-Locking Wire Harness

Pitch
1.00 mm
Circuits
15 Pin
Wire Spec
28 AWG
Connector
JST NSHR-15V-S (NSH Positive Lock)
Ratings / Length
1.0A · 50V · Vibration-Resistant Locking Latch
HFL-JH-04P-250-24 - 4-Pin JST JH 2.50mm to Molex 4-Wire Fan Y-Splitter Cable Assembly
Hybrid Transition · 2.50 mm #26
HFL-JH-04P-250-24

4-Pin JST JH 2.50mm to Molex 4-Wire Fan Y-Splitter Cable Assembly

Pitch
2.50 mm
Circuits
4 Pin (Y-Branch)
Wire Spec
24–26 AWG
Connector
JST JH 2.50mm to Molex 4-Wire Fan Y-Split
Ratings / Length
Custom Branch Lengths · Fan & LVDS Signal Routing
HFL-SHLP-06P-100-28S - 6-Pin JST SHLP-06V-S-B to SHR-6P Signal & Power Harness Assembly
Micro Pitch · 1.00 mm #27
HFL-SHLP-06P-100-28S

6-Pin JST SHLP-06V-S-B to SHR-6P Signal & Power Harness Assembly

Pitch
1.00 mm
Circuits
6 Pin
Wire Spec
28–30 AWG
Connector
JST SHLP-06V-S-B to JST SHR-06V-S-B
Ratings / Length
Signal & Low-Power Transmission · Custom Length
HFL-PHR-04P-200-24 - 4-Pin JST PH2.0 (PHR-4P) Wire Harness Cable Assembly, 400mm
Standard Pitch · 2.00 mm #28
HFL-PHR-04P-200-24

4-Pin JST PH2.0 (PHR-4P) Wire Harness Cable Assembly, 400mm

Pitch
2.00 mm
Circuits
4 Pin
Wire Spec
24–26 AWG
Connector
JST PHR-4P (PH2.0 Series)
Ratings / Length
400 mm Standard Length · 2.0A · 100V
HFL-XSR-4P10P-060-36 - 0.60mm Pitch JST 04XSR to 10XSR IDC Wire Harness Cable Assembly
Ultra-Fine Pitch · 0.60 mm #29
HFL-XSR-4P10P-060-36

0.60mm Pitch JST 04XSR to 10XSR IDC Wire Harness Cable Assembly

Pitch
0.60 mm
Circuits
4 Pin to 10 Pin
Wire Spec
36 AWG
Connector
JST 04XSR to JST 10XSR IDC
Ratings / Length
High-Density IDC Termination · Custom Length
HFL-XSR-06P-060-36 - 0.60mm Pitch JST 04XSR / 06XSR / 10XSR-36KHF Micro-Coax Cable
Ultra-Fine Pitch · 0.60 mm #30
HFL-XSR-06P-060-36

0.60mm Pitch JST 04XSR / 06XSR / 10XSR-36KHF Micro-Coax Cable

Pitch
0.60 mm
Circuits
4 / 6 / 10 Pin (2–16P)
Wire Spec
36 AWG Micro Coax (Pure Copper/PVC)
Connector
JST 04XSR-36KHF / 06XSR-36KHF / 10XSR-36KHF
Ratings / Length
0.2A · 30V AC/DC · LCP UL94V-0 · Pull-Force Tested
HFL-MXPH-08P-125-26 - 8-Pin 1.25mm Molex 51146-0800 to JST PHR-7P / MX3.0 43645-2P Cable
Hybrid Transition · 1.25 mm / 2.00 mm / 3.00 mm #31
HFL-MXPH-08P-125-26

8-Pin 1.25mm Molex 51146-0800 to JST PHR-7P / MX3.0 43645-2P Cable

Pitch
1.25 mm / 2.00 mm / 3.00 mm
Circuits
8 Pin to 7P / 2P
Wire Spec
26 AWG (UL1061)
Connector
Molex 51146-0800 to JST PHR-7P / MX3.0 43645-2P
Ratings / Length
100% Open/Short · 200V Hi-Pot · IR ≥20 MΩ · CR ≤3Ω
HFL-SHLP-10P-100-28 - 10-Pin JST SHLP-10V-S-B LVDS & Coaxial Semi-Stripped Automotive Harness
Micro Pitch · 1.00 mm #32
HFL-SHLP-10P-100-28

10-Pin JST SHLP-10V-S-B LVDS & Coaxial Semi-Stripped Automotive Harness

Pitch
1.00 mm
Circuits
10 Pin
Wire Spec
28–30 AWG / Coaxial
Connector
JST SHLP-10V-S-B to Semi-Stripped Leads
Ratings / Length
100% Open/Short · AC 100V Hi-Pot · IR ≥20 MΩ · CR ≤5Ω
HFL-SUHR-02P-080-28 - 2-Pin 0.80mm Face-Up to 6-Pin JST NSHR-6P 1.00mm Buckle Harness
Ultra-Fine Pitch · 0.80 mm to 1.00 mm #33
HFL-SUHR-02P-080-28

2-Pin 0.80mm Face-Up to 6-Pin JST NSHR-6P 1.00mm Buckle Harness

Pitch
0.80 mm to 1.00 mm
Circuits
2 Pin to 6 Pin
Wire Spec
28–30 AWG
Connector
0.80mm 2P Face-Up to JST NSHR-06V-S Buckle
Ratings / Length
100% Open/Short · AC 100V Hi-Pot · IR ≥20 MΩ · CR ≤5Ω

No matching wire harness assemblies found

Reset the search filter or send your custom connector specification directly to our engineering desk below.

Process Control & Compliance

Precision Manufacturing & Quality Assurance

Every HiFlexlinK wire harness assembly is engineered for zero-defect repeatability from initial prototype to volume OEM delivery.

50mm – 5,000mm

Custom Wire Lengths & Branching

Cut-to-length precision within ±2mm tolerance, supporting glued pairs, twisted signal pairs, Y-splitter fan harnesses, semi-stripped tin-dipped leads, and heat-shrink strain relief.

100% Inspected

100% Continuity, Hi-Pot & Pull Testing

Every JST cable assembly undergoes automated open, short, and intermittence verification, AC 100V–200V Hi-Pot dielectric testing, ≥20 MΩ insulation checks, and terminal crimp pull-force validation.

UL1007 / UL1061 / UL1571

UL Hook-Up Wire & RoHS / REACH Compliance

Manufactured using UL-recognized tinned copper conductors (18 AWG to 36 AWG micro-coax) and UL94V-0 flame-retardant housings rated up to -40°C to +105°C for industrial and automotive deployment.

3–5 Day Samples

Rapid Prototyping & Flexible OEM MOQ

Fast engineering sample runs for hardware validation paired with scalable automated crimp production lines for high-volume OEM builds.

Frequently Asked Technical Questions

Can HiFlexlinK supply both original JST / Molex / TE housings and cost-optimized equivalents?

Yes. For regulated medical, automotive, and industrial programs requiring strict BOM traceability, HiFlexlinK builds with 100% original JST, Molex, and TE Connectivity housings and terminals. When cost optimization or lead-time resilience is prioritized, we also offer UL94V-0 form-fit-function equivalents validated for identical contact pitch, retention force, and mating geometry.

How do I select the right AWG wire gauge for JST PH, XH, SH, and ZH cable assemblies?

Conductor gauge depends on both housing terminal acceptance and current load. Power-oriented JST XH (2.50mm) and VH (3.96mm) assemblies typically accept 22–18 AWG for 3A–13A rails, JST PH (2.00mm) and ZH (1.50mm) pair with 24–26 AWG for 1A–2A circuits, while ultra-compact SH/SHL/NSH (1.00mm) and SUHR/XSR (0.80mm–0.60mm) assemblies utilize 28–36 AWG UL1061, UL1571, or micro-coaxial conductors.

Do you support hybrid connector transitions such as JST PHR or SHJP to Molex 51021 / 51146?

Yes. Many LED backlight drivers, LCD panels, and robotic control boards require cross-brand adapter harnesses. HiFlexlinK routinely manufactures hybrid JST-to-Molex and JST-to-TE assemblies—including HFL-SHJP-06P-100-28, HFL-PHR-06P-200-28M, and HFL-MXPH-08P-125-26—mapped exactly to your PCB pinout table.

What engineering files are needed to quote a custom JST wire harness?

A simple pinout table, schematic PDF, 2D harness drawing, or reference photo noting connector part numbers, wire color coding, overall length, and target quantity is sufficient. Our engineering team reviews BOMs within 24 hours to confirm terminal tooling and wire availability.