Precision Wire-to-Board & Power Interconnect Engineering
Custom Molex Cable Assemblies & Precision Wire Harnesses
HiFlexlinK manufactures OEM and ODM wire harness solutions spanning 1.25 mm PicoBlade cable assemblies, 3.00 mm Molex Micro-Fit 3.0, 2.50 mm Nano-Fit, 4.20 mm Mini-Fit Jr., and 5.70 mm Mega-Fit power leads. Every Molex assembly uses UL-certified conductors and automated crimp tooling

| 34 Series Standardized HFL- Wire Harness Configurations | 1.25 – 5.70 mm Supported Connector Centerline Pitches | 14 – 30 AWG UL1007, UL1015, UL1571, UL2464 & Silicone | 100% Tested Electrical Continuity & Terminal Pull-Force |
Engineering Identification Standard
HiFlexlinK Part Number Nomenclature Guide
Every HiFlexlinK Molex cable assembly uses a five-segment code encoding housing series, pin count, pitch, and AWG wire gauge.
Reference Part Code Breakdown HFL-PB5102-05P-125-28A
| HFL Brand Prefix Identifies HiFlexlinK precision-crimped cable assemblies. | PB5102 Connector Series Encodes housing family (e.g., PB5102 = PicoBlade 51021, MG1716 = Mega-Fit). | 05P Circuit Count Indicates total pin positions from 02P up to 26P. | 125 Centerline Pitch Spacing in 0.01 mm units (125 = 1.25 mm, 254 = 2.54 mm, 570 = 5.70 mm). | 28A Wire Gauge Primary conductor size in AWG (14A = 14 AWG to 30A = 30 AWG). |
Complete OEM / ODM Production Series
HiFlexlinK Molex Cable Assembly Catalog (34 Models)
Browse all 34 standardized wire harness assemblies, filter by connector series or pitch, and switch between Card Grid and Spec Table.
Molex 2014441104 2x2P Plug Housing to KT SVL1.25-4 #8 Terminal Harness
High-reliability 2.50 mm dual-row power distribution assembly pairing a Molex 2014441104 plug housing with pre-crimped KT SVL1.25-4 #8 spade terminals for OEM/ODM industrial panels.
- Connectors
- Molex 2014441104 (2x2P Plug Housing) to KT SVL1.25-4 #8 Fork Terminal
- Pitch / Pins
- 2.50 mm · 4-Pin (2×2)
- Wire Gauge
- 16–22 AWG
- Length & Spec
- Custom (150–2000 mm) · UL PVC / RoHS Compliant
Molex 87439-0501 1.50 mm Pitch UL E29179 Certified Cable Assembly
Compact 1.50 mm pitch wire-to-board Molex cable assembly built with UL E29179 certified hook-up wire for space-constrained embedded controllers and instrumentation.
- Connectors
- Molex 87439-0501 (Pico-SPOX 1.50 mm Series)
- Pitch / Pins
- 1.50 mm · 5-Pin
- Wire Gauge
- 26 AWG (24–28 AWG Options)
- Length & Spec
- Custom (100–1500 mm) · UL E29179 Certified PVC
Molex 0679260011 Female SATA Power to 3.81 mm LVDS Display Power Cable
Regulated SATA power-to-display harness combining a Molex 0679260011 female receptacle with a 3.81 mm pitch LVDS display power connector for industrial monitors and POS terminals.
- Connectors
- Molex 0679260011 SATA Power Female to 3.81 mm Display Interface
- Pitch / Pins
- 3.81 mm · 15-Pin SATA Power
- Wire Gauge
- 18 AWG
- Length & Spec
- Custom (150–1000 mm) · UL1007 80°C 300V PVC
Molex 90142-0016 6-Pin 2.54 mm Pitch to RJ12 Network Interface Cable
Internal board-to-panel telemetry adapter bridging a 2.54 mm Molex 90142-0016 C-Grid III housing directly to a latched RJ12 6P6C network plug.
- Connectors
- Molex 90142-0016 (C-Grid III) to RJ12 6P6C Modular Plug
- Pitch / Pins
- 2.54 mm · 6-Pin
- Wire Gauge
- 24–26 AWG
- Length & Spec
- Custom (200–3000 mm) · UL2464 / Modular Jacket
Molex 51146-0600 1.25 mm Pitch LED Cable Assembly to JST PHR-6
Cross-series LED lighting and display interconnect converting Molex 51146-0600 1.25 mm pitch headers to JST PHR-6 2.00 mm housings with verified pin-to-pin continuity.
- Connectors
- Molex 51146-0600 (1.25 mm) to JST PHR-6 (2.00 mm)
- Pitch / Pins
- 1.25 mm / 2.00 mm · 6-Pin
- Wire Gauge
- 28 AWG
- Length & Spec
- Custom (100–1200 mm) · UL1571 / UL1061 PVC
Molex PicoBlade 51021 Series 5-Pin 1.25 mm Pitch Wire Harness
Precision PicoBlade cable assembly utilizing genuine-compatible 51021 housings and friction-lock crimp terminals for compact sensors, drones, and medical handhelds.
- Connectors
- Molex PicoBlade 51021-0500 / 51021-0600 Series
- Pitch / Pins
- 1.25 mm · 5-Pin
- Wire Gauge
- 28 AWG
- Length & Spec
- Custom (80–1000 mm) · UL1571 80°C 30V
Molex Mini-Fit Jr. 39-01-2040 to JST B2P-VH Console Power Cable
Heavy-duty Mini-Fit Jr. cable assembly pairing Molex 39-01-2040 4.20 mm housings with JST B2P-VH console power connectors for rackmount power supplies and gaming consoles.
- Connectors
- Molex Mini-Fit Jr. 39-01-2040 (4.20 mm) to JST B2P-VH (3.96 mm)
- Pitch / Pins
- 4.20 mm / 3.96 mm · 4-Pin to 2-Pin
- Wire Gauge
- 18 AWG
- Length & Spec
- Custom (200–1500 mm) · UL1007 / UL1015 105°C
3-Pin 1.50 mm Pitch Soft Silicone Wire Harness with Crimped Sockets
High-flex 3-pin 1.50 mm pitch silicone wire harness engineered for tight bend radii, gimbal actuators, and vibration-heavy robotic joints.
- Connectors
- 1.50 mm Pitch Crimp Socket Housing (Molex / JST ZH Compatible)
- Pitch / Pins
- 1.50 mm · 3-Pin
- Wire Gauge
- 26 AWG
- Length & Spec
- Custom (100–1200 mm) · Ultra-Flexible High-Temp Silicone
Molex Nano-Fit 105307-1203 GEOS Pyro Power Wire Harness Assembly
Fully isolated header-protected Nano-Fit 105307-1203 wire harness designed for GEOS pyro modules, industrial sensors, and compact high-current boards.
- Connectors
- Molex Nano-Fit 105307-1203 (2.50 mm Pitch TPA Receptacle)
- Pitch / Pins
- 2.50 mm · 3-Pin
- Wire Gauge
- 20–22 AWG
- Length & Spec
- Custom (150–1500 mm) · UL1007 / High-Temp Cross-Linked
Samtec ACRK-12 Circular to Molex Micro-Lock Plus 26-Pin CAT6A Assembly
High-speed shielded data harness combining a rugged Samtec ACRK-12 circular bulkhead connector with a 26-pin Molex Micro-Lock Plus internal latch housing.
- Connectors
- Samtec ACRK-12 Circular to Molex Micro-Lock Plus 26-Pin
- Pitch / Pins
- 1.25 mm · 26-Pin
- Wire Gauge
- 26 AWG CAT6A Shielded
- Length & Spec
- Custom (300–5000 mm) · CAT6A S/FTP Shielded Jacket
Neutrik NC3FXX 3-Pin XLR Female to Molex 51163-0300 UL2464 Assembly
Low-noise pro-audio and industrial control interconnect linking a genuine Neutrik NC3FXX female XLR plug to a Molex 51163-0300 internal PCB receptacle.
- Connectors
- Neutrik NC3FXX XLR 3-Pin Female to Molex 51163-0300 (2.00 mm)
- Pitch / Pins
- 2.00 mm · 3-Pin
- Wire Gauge
- 20 AWG
- Length & Spec
- Custom (250–3000 mm) · UL2464 Foil & Braid Shielded
20-Pin to 24-Pin IDC Flat Ribbon Cable Assembly (UL2651 28AWG)
Mass-terminated flat flex ribbon assembly with strain-relief IDC sockets supporting custom pin-mapping between 20-pin and 24-pin backplane headers.
- Connectors
- 20-Pin IDC Socket to 24-Pin IDC Socket Header
- Pitch / Pins
- 2.54 mm · 20-Pin to 24-Pin
- Wire Gauge
- 28 AWG
- Length & Spec
- Custom (100–1500 mm) · UL2651 Flat Ribbon Grey PVC
Molex 2.54 mm 10-Pin Front Panel Wire Harness for OEM Enclosures
Color-coded 10-pin 2.54 mm front-panel I/O and LED switch harness engineered for server chassis, industrial HMIs, and IPC motherboards.
- Connectors
- Molex 2.54 mm 2×5 (10-Pin) Front Panel Housing
- Pitch / Pins
- 2.54 mm · 10-Pin (2×5)
- Wire Gauge
- 24 AWG
- Length & Spec
- Custom (150–1000 mm) · UL1007 80°C 300V PVC
Industrial Machine Vision Camera Cable with JAE & Molex Connectors (1000 mm)
EMI-shielded 1000 mm machine vision harness integrating precision JAE camera connectors with Molex board-side terminations for automated optical inspection systems.
- Connectors
- JAE Camera Interface to Molex Wire-to-Board Housing
- Pitch / Pins
- 1.25 mm · Multi-Pin Shielded
- Wire Gauge
- 28 AWG Twisted Pair
- Length & Spec
- 1000 mm Standard · High-Flex Drag-Chain Shielded
3-Pin Molex 1.50 mm Pitch Wire Harness with Soft Silicone Leads
Higher-ampacity 24 AWG silicone-jacketed 1.50 mm Molex harness providing thermal resilience and supple routing inside compact battery and motor enclosures.
- Connectors
- Molex 1.50 mm Pitch 3-Pin Crimp Housing
- Pitch / Pins
- 1.50 mm · 3-Pin
- Wire Gauge
- 24 AWG
- Length & Spec
- Custom (100–1000 mm) · 200°C Soft Silicone Rubber
5.00 mm Pitch to 3.00 mm Pitch Power Adapter Harness (UL1007 20AWG)
Step-down pitch conversion cable bridging 5.00 mm field power blocks to 3.00 mm Micro-Fit style PCB receptacles using UL1007 20 AWG stranded copper conductors.
- Connectors
- 5.00 mm Pitch Housing to 3.00 mm Pitch Micro-Fit Compatible Housing
- Pitch / Pins
- 5.00 mm / 3.00 mm · 4-Pin / Multi-Circuit
- Wire Gauge
- 20 AWG
- Length & Spec
- Custom (150–1500 mm) · UL1007 80°C 300V PVC
90-Degree Right-Angle 2.1×5.5 mm DC Plug to 2-Pin Cable Assembly
Space-saving right-angle 2.1×5.5 mm DC barrel power jumper terminated to a polarized 2-pin internal board connector for enclosure wall passthroughs.
- Connectors
- 90° Molded 2.1×5.5 mm DC Barrel Plug to 2-Pin Molex Housing
- Pitch / Pins
- 2.54 mm · 2-Pin
- Wire Gauge
- 24 AWG
- Length & Spec
- Custom (200–2000 mm) · UL2648 Parallel / Jacketed Wire
IP67 Waterproof M8 Male Circular to 1.25 mm Pitch Wire-to-Wire Cable
Sealed IP67 M8 external sensor interface transitioning directly into a compact 1.25 mm internal PCB connector for outdoor telemetry and washdown machinery.
- Connectors
- IP67 M8 Male Circular Plug to 1.25 mm PicoBlade-Style Connector
- Pitch / Pins
- 1.25 mm · 3-Pin / 4-Pin
- Wire Gauge
- 26 AWG
- Length & Spec
- Custom (300–3000 mm) · UL1061 / Overmolded TPU Jacket
12-Pin Mixed-Gauge Custom Wire Harness (24 AWG & 28 AWG UL1571)
Hybrid-gauge 12-circuit harness combining 24 AWG power rails and 28 AWG signal lines inside a unified 2.00 mm housing for compact mezzanine boards.
- Connectors
- 12-Pin Molex / JST Hybrid Wire-to-Board Housing
- Pitch / Pins
- 2.00 mm · 12-Pin
- Wire Gauge
- 24 AWG & 28 AWG Mixed
- Length & Spec
- Custom (150–1500 mm) · UL1571 80°C 30V
Molex Mega-Fit 171692-0202 5.70 mm Pitch Symmetrical Dual-End Power Cable
High-current 23A-class symmetrical power jumper terminated at both ends with Molex 171692-0202 5.70 mm Mega-Fit housings and positive-lock latches.
- Connectors
- Dual Molex Mega-Fit 171692-0202 (1x2P Symmetrical Plug Housings)
- Pitch / Pins
- 5.70 mm · 2-Pin (1×2)
- Wire Gauge
- 14–16 AWG
- Length & Spec
- Custom (200–2500 mm) · UL1015 105°C 600V PVC
Molex Mega-Fit 171692-0202 to TE Deutsch DT04-2P & KT RVL2-4 Harness
Rugged power harness integrating Molex 171692-0202 5.70 mm Mega-Fit on the control side with a sealed TE Deutsch DT04-2P plug and KT RVL2-4 ground ring.
- Connectors
- Molex Mega-Fit 171692-0202 to TE DT04-2P & KT RVL2-4 Ring Terminal
- Pitch / Pins
- 5.70 mm · 2-Pin (1×2) + Ring
- Wire Gauge
- 16 AWG
- Length & Spec
- Custom (250–2500 mm) · Automotive / Industrial Grade XLPE/PVC
JT SH1100502A-T-S to Molex Nano-Fit 200277-1102 2-Pin 2.50 mm Assembly
RoHS-compliant power interconnect connecting a JT SH1100502A-T-S interface to a 2.50 mm pitch Molex Nano-Fit 200277-1102 housing for compact industrial power buses.
- Connectors
- JT SH1100502A-T-S to Molex Nano-Fit 200277-1102 Plug Housing
- Pitch / Pins
- 2.50 mm · 2-Pin
- Wire Gauge
- 18–22 AWG
- Length & Spec
- Custom (150–1500 mm) · RoHS Compliant UL1007/UL1015
Molex Mega-Fit 171692-0206 (2x3P) to KST FDFN2-250 Faston Terminal Harness
Six-circuit 5.70 mm Mega-Fit power breakout terminating into fully insulated KST FDFN2-250 0.8×6.35 mm quick-disconnect female receptacles for power supply chassis.
- Connectors
- Molex Mega-Fit 171692-0206 (2x3P) to KST FDFN2-250 0.8×6.35 mm Female
- Pitch / Pins
- 5.70 mm · 6-Pin (2×3)
- Wire Gauge
- 16–18 AWG
- Length & Spec
- Custom (200–2000 mm) · UL1015 105°C Nylon-Insulated Faston
Molex Mega-Fit 171692-0210 (2x5P) 5.70 mm to DC Plug Multi-Branch Harness
Ten-circuit 5.70 mm Mega-Fit distribution harness splitting high-current PSU rails into molded DC barrel plugs and secondary OEM combination connectors.
- Connectors
- Molex Mega-Fit 171692-0210 (2x5P) to DC Barrel Plug & Branch Leads
- Pitch / Pins
- 5.70 mm · 10-Pin (2×5)
- Wire Gauge
- 16–18 AWG
- Length & Spec
- Custom Multi-Branch Lengths · UL1015 / Braided Sleeving Options
Molex SL 22-55-2101 10-Pin 2.54 mm Pitch Cable Assembly (150 mm, 30 AWG)
Fine-gauge 150 mm internal board-to-board jumper featuring Molex 22-55-2101 2.54 mm housings for low-voltage telemetry and embedded debug headers.
- Connectors
- Molex SL 22-55-2101 (C-Grid 2x5P Receptacle)
- Pitch / Pins
- 2.54 mm · 10-Pin (2×5)
- Wire Gauge
- 30 AWG
- Length & Spec
- 150 mm Standard · UL1571 Flexible Fine-Strand PVC
Molex 50-57-9002 2-Pin 2.54 mm Chassis Power Button Switch Harness (26 AWG)
Dedicated 2-pin Molex 50-57-9002 motherboard power button, reset switch, and indicator LED lead crafted with 26 AWG twisted-pair UL1007 hook-up wire.
- Connectors
- Molex SL 50-57-9002 (2-Pin Single Row Housing)
- Pitch / Pins
- 2.54 mm · 2-Pin
- Wire Gauge
- 26 AWG
- Length & Spec
- Custom (150–800 mm) · UL1007 80°C 300V
Dual Molex 22-55-2101 10-Pin 2.54 mm Dual-USB Internal PCB Cable Assembly
Symmetrical 2×5-pin Molex 22-55-2101 interconnect designed for dual internal USB PCB headers and legacy workstation expansion cards.
- Connectors
- Molex 22-55-2101 to Molex 22-55-2101 (Dual 2x5P)
- Pitch / Pins
- 2.54 mm · 10-Pin (2×5)
- Wire Gauge
- 26–28 AWG
- Length & Spec
- Custom (120–600 mm) · UL2464 / Shielded Twisted Pair
Molex 50-57-9002 2-Pin LVDS Display Power Cable Assembly (150 mm)
Precision 150 mm LVDS display backlight and inverter power jumper using 2-pin Molex 50-57-9002 housings for commercial LCD panels.
- Connectors
- Molex SL 50-57-9002 2-Pin LVDS Display Interface
- Pitch / Pins
- 2.54 mm · 2-Pin
- Wire Gauge
- 26 AWG
- Length & Spec
- 150 mm Standard · UL1007 / UL1571 PVC
Molex 0510470200 2-Pin 1.25 mm CMOS Battery & LVDS Extension Cable
Low-profile 1.25 mm Molex 0510470200 CMOS RTC battery and miniature LVDS display extension cable engineered for embedded SBCs and industrial laptops.
- Connectors
- Molex PicoBlade 051047-0200 (1.25 mm 2-Pin)
- Pitch / Pins
- 1.25 mm · 2-Pin
- Wire Gauge
- 28 AWG
- Length & Spec
- Custom (80–500 mm) · UL1571 80°C Red/Black Leads
Molex DuraClik 502351-0600 2.00 mm 6P Housing to 4-Lead Tinned Pigtail
High-vibration positive-locking Molex 502351-0600 2.00 mm harness selectively populated with 4 color-coded UL1007 22 AWG conductors stripped and pre-tinned for solder termination.
- Connectors
- Molex DuraClik 502351-0600 (6P Housing, 4 Positions Loaded) to Tinned Ends
- Pitch / Pins
- 2.00 mm · 6-Pin (4 Loaded)
- Wire Gauge
- 22 AWG
- Length & Spec
- Custom (150–1000 mm) · UL1007 80°C 300V Color-Coded PVC
Molex Mini-Fit Jr. 46992-0210 to 39-00-0186 Gold-Plated Crimp Power Harness
Low-contact-resistance Mini-Fit power assembly fitted with Molex 39-00-0186 gold-plated female crimp terminals rated for 14–16 AWG high-current industrial DC lines.
- Connectors
- Molex 46992-0210 Housing with Molex 39-00-0186 Gold-Plated Female Terminals
- Pitch / Pins
- 4.20 mm · 2-Pin / High-Current
- Wire Gauge
- 14–16 AWG
- Length & Spec
- Custom (150–2000 mm) · UL1015 105°C 600V Heavy Gauge
Molex Micro-Fit 3.0 43025-0610 6-Pin to Automotive Coax Hybrid Wire Harness
Hybrid Molex Micro-Fit 3.0 cable assembly combining a 6-pin 43025-0610 3.00 mm latch housing with precision coaxial RF lines for automotive telematics and ADAS modules.
- Connectors
- Molex Micro-Fit 3.0 43025-0610 (6-Pin) to Shielded Automotive Coax
- Pitch / Pins
- 3.00 mm · 6-Pin (2×3) + Coax
- Wire Gauge
- 20–24 AWG + RF Coax
- Length & Spec
- Custom (250–3000 mm) · Automotive Grade / Braided Shield
Samtec 1.27 mm Pitch Dual-Row 20-Pin Server Backplane Cable Assembly
High-density 1.27 mm dual-row 20-circuit server board cable assembly engineered for blade servers, FPGA mezzanine routing, and storage backplanes.
- Connectors
- Samtec 1.27 mm Pitch Dual-Row 20-Pin Receptacle
- Pitch / Pins
- 1.27 mm · 20-Pin (2×10 Dual-Row)
- Wire Gauge
- 28–30 AWG
- Length & Spec
- Custom (100–1000 mm) · UL1571 / Fine-Pitch Signal Ribbon
Molex KK 254 (22-23-2031 to 22-01-3037) 3-POS Fan Header Extension Cable
Standard 3-position cooling fan header extension assembly coupling Molex 22-23-2031 male pins with a polarized 22-01-3037 2.54 mm receptacle.
- Connectors
- Molex KK 254 22-23-2031 Header to 22-01-3037 Housing (3-Position)
- Pitch / Pins
- 2.54 mm · 3-Pin
- Wire Gauge
- 22 AWG
- Length & Spec
- Custom (150–1200 mm) · UL1007 Hook-Up Wire
Process Verification & Standards
Manufacturing Precision & Quality Assurance
Explore coaxial interconnects alongside wire harnesses on the main RF-Coaxial engineering portal.
| 01. Custom Wire Lengths & Pinout Mapping Automated cut-strip-crimp lines support lengths from 50 mm to 5,000 mm, custom color coding, twisted pairs, and cross-series Molex-to-JST termination. | 02. 100% Continuity & Pull-Force Testing Every finished Molex wire harness passes 100% point-to-point continuity, short-circuit, and polarity verification alongside calibrated terminal pull-force testing. |
| 03. UL-Certified Conductors & Full Compliance Built with UL1007, UL1015, UL1571, UL2464, UL2651, UL E29179, and 200C silicone wires meeting full RoHS 2.0 and REACH compliance. | 04. Flexible Prototype & Production MOQ Rapid engineering samples for EVT/DVT hardware bring-up paired with scalable automated crimping capacity for volume OEM runs. |
Application Engineering Reference
Technical Selection & Sourcing FAQ
How do I select between Molex PicoBlade, Micro-Fit 3.0, Nano-Fit, Mini-Fit Jr., and Mega-Fit assemblies?
Choose 1.25 mm PicoBlade (26-30 AWG) for compact signal routing up to 1 A, 2.50 mm Nano-Fit or 3.00 mm Micro-Fit 3.0 for space-saving mid-power rails up to 8.5 A, 4.20 mm Mini-Fit Jr. (14-18 AWG) for 9-13 A harnesses, and 5.70 mm Mega-Fit (14-16 AWG) up to 23 A per circuit.
Can HiFlexlinK cross-terminate Molex housings with JST, Samtec, TE Deutsch, or Neutrik XLR connectors?
Yes. Proven hybrid transitions include Molex 51146-0600 to JST PHR-6, Mini-Fit 39-01-2040 to JST B2P-VH, Mega-Fit 171692-0202 to TE Deutsch DT04-2P, Samtec ACRK-12 circular to Molex Micro-Lock 26-pin, and Neutrik NC3FXX XLR to Molex 51163-0300.
Which UL wire styles are available when assembling Molex connectors?
Standard builds use UL1007 (80C 300V PVC), UL1015 (105C 600V heavy PVC), UL1571 (80C 30V micro-pitch), UL2464 shielded cable, UL2651 flat ribbon, and high-flex silicone wire.
What quality checks are performed before shipment?
Every batch undergoes 100% automated electrical continuity, insulation resistance, pinout verification, crimp height inspection, and calibrated tensile pull-force testing.
