HiFlexlinK Precision Interconnects
Embedded DisplayPort (eDP) Micro-Coaxial Cable Assemblies
Engineered for high-speed display integration across industrial panels, medical imaging systems, and rugged embedded computing. HiFlexlinK delivers precision-crimped micro-coaxial and twisted-pair eDP harnesses featuring 100-ohm controlled impedance, 360-degree EMI shielding, and rapid 5-to-7 day engineering prototyping.
100%
Continuity & Hi-Pot Tested
100 Ω ±5%
TDR Differential Impedance
0.25–1.25 mm
Fine-Pitch Terminations
5–7 Days
Custom Prototype Lead Time

HiFlexlinK Part Number Nomenclature Guide
Every HiFlexlinK assembly follows a deterministic five-segment engineering code identifying the connector series, contact count, pitch geometry, and conductor gauge.
HFL
VS
40P
05
40
Example Decode: HiFlexlinK Standard · I-PEX CABLINE-VS Series · 40 Contacts · 0.5 mm Pitch · 40 AWG Micro-Coaxial Wire
HFL
Brand Identifier
Designates certified HiFlexlinK precision display interconnect assembly.
HFL = HiFlexlinK Standard
VS / CA / DF36 / KEL
Connector Series Code
Primary eDP mating interface family or dual-end connector architecture.
VS / VS2 = I-PEX 20453 / 20454 / 20455
CA / CA2P = I-PEX 20679 / 20790
UX / V / F = I-PEX 20531 / 20380 / 20633
DF36 / DF38 / DF56 / DF80 = Hirose Micro-Coax
JHD / KEL = JAE HD1P / KEL USL & SSL
HYB = Cross-Series eDP Hybrid
30P / 40P / 50P
Pin Count
Active contact positions supporting 1-lane, 2-lane, or 4-lane eDP signaling plus auxiliary signals.
20P = 20 Contacts
30P = 30 Contacts
40P = 40 Contacts
50P = 50 Contacts
03 / 04 / 05
Contact Pitch
Center-to-center terminal spacing encoded in tenths of a millimeter.
025 = 0.25 mm Pitch
03 = 0.3 mm Pitch
04 = 0.4 mm Pitch
05 = 0.5 mm Pitch
38 / 40 / 42 / 44
Conductor Gauge (AWG)
Micro-coaxial or twinax wire gauge tuned for bend radius and attenuation budget.
38 = 38 AWG
40 = 40 AWG
42 = 42 AWG
44 = 44 AWG
HiFlexlinK eDP Cable Assembly Catalog
Verified Embedded DisplayPort harnesses across I-PEX CABLINE, JAE FI-X / FI-RE, Hirose DF series, and hybrid panel-to-board configurations. Custom lengths and pinouts built to drawing.

40-Pin I-PEX 20679-040T-01 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.4 mm pitch 38 AWG precision eDP assembly engineered with I-PEX 20679-040T-01 and I-PEX 20679-040T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20679-040T-01 |
|---|---|
| Connector B | I-PEX 20679-040T-01 |
| Pin / Pitch | 40 Pin / 0.4 mm |
| Wire Gauge | 38 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Full EMI Shield + Metal Shell |

40-Pin I-PEX 20453-240T-03 to Hirose DF80D-40P-0.5SD 0.5 mm eDP Harness
40-position 0.5 mm pitch 36 AWG precision eDP assembly engineered with I-PEX 20453-240T-03 and Hirose DF80D-40P-0.5SD terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-240T-03 |
|---|---|
| Connector B | Hirose DF80D-40P-0.5SD |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Full EMI Shield + Metal Shell |

30-Pin Hirose DF36A-30S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-30S-0.4V and Hirose DF36A-30S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-30S-0.4V |
|---|---|
| Connector B | Hirose DF36A-30S-0.4V |
| Pin / Pitch | 30 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20453-330T-13 to I-PEX 20453-340T-13 0.5 mm eDP Harness
30-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20453-330T-13 and I-PEX 20453-340T-13 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-330T-13 |
|---|---|
| Connector B | I-PEX 20453-340T-13 |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

45-Pin Hirose DF36-45P-0.4SD 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
45-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36-45P-0.4SD and Hirose DF36-45P-0.4SD terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36-45P-0.4SD |
|---|---|
| Connector B | Hirose DF36-45P-0.4SD |
| Pin / Pitch | 45 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

15-Pin Hirose DF36A-15P-SHL to Hirose DF36A-30P-SHL 0.4 mm eDP Harness
15-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-15P-SHL and Hirose DF36A-30P-SHL terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-15P-SHL |
|---|---|
| Connector B | Hirose DF36A-30P-SHL |
| Pin / Pitch | 15 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin Hirose DF56-40P-SHL 0.3 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.3 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF56-40P-SHL and Hirose DF56-40P-SHL terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF56-40P-SHL |
|---|---|
| Connector B | Hirose DF56-40P-SHL |
| Pin / Pitch | 40 Pin / 0.3 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

45-Pin Hirose DF36A-45P-0.4SHL 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
45-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-45P-0.4SHL and Hirose DF36A-45P-0.4SHL terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-45P-0.4SHL |
|---|---|
| Connector B | Hirose DF36A-45P-0.4SHL |
| Pin / Pitch | 45 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

45-Pin Hirose DF36-45S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
45-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36-45S-0.4V and Hirose DF36-45S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36-45S-0.4V |
|---|---|
| Connector B | Hirose DF36-45S-0.4V |
| Pin / Pitch | 45 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

15-Pin Hirose DF36C-15P-0.4SD 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
15-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36C-15P-0.4SD and Hirose DF36C-15P-0.4SD terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36C-15P-0.4SD |
|---|---|
| Connector B | Hirose DF36C-15P-0.4SD |
| Pin / Pitch | 15 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin 0.5 mm Fine-Pitch Micro-Coax Connector 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.5 mm pitch 36 AWG precision eDP assembly engineered with 0.5 mm Fine-Pitch Micro-Coax Connector and 0.5 mm Fine-Pitch Micro-Coax Connector terminations for industrial display and high-speed imaging links.
| Connector A | 0.5 mm Fine-Pitch Micro-Coax Connector |
|---|---|
| Connector B | 0.5 mm Fine-Pitch Micro-Coax Connector |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20453-230-03 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.5 mm pitch 36 AWG precision eDP assembly engineered with I-PEX 20453-230-03 and I-PEX 20453-230-03 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-230-03 |
|---|---|
| Connector B | I-PEX 20453-230-03 |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

20-Pin Hirose DF49-20P-SHL to Hirose DF49-20P 0.4 mm eDP Harness
20-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF49-20P-SHL and Hirose DF49-20P terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF49-20P-SHL |
|---|---|
| Connector B | Hirose DF49-20P |
| Pin / Pitch | 20 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

45-Pin Hirose DF36A-45S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
45-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-45S-0.4V and Hirose DF36A-45S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-45S-0.4V |
|---|---|
| Connector B | Hirose DF36A-45S-0.4V |
| Pin / Pitch | 45 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin Hirose DF36A-40S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-40S-0.4V and Hirose DF36A-40S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-40S-0.4V |
|---|---|
| Connector B | Hirose DF36A-40S-0.4V |
| Pin / Pitch | 40 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

25-Pin Hirose DF36A-25S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
25-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-25S-0.4V and Hirose DF36A-25S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-25S-0.4V |
|---|---|
| Connector B | Hirose DF36A-25S-0.4V |
| Pin / Pitch | 25 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin I-PEX 20410-040U to I-PEX 20453-020T-01 0.5 mm eDP Harness
40-position 0.5 mm pitch 32 AWG precision eDP assembly engineered with I-PEX 20410-040U and I-PEX 20453-020T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20410-040U |
|---|---|
| Connector B | I-PEX 20453-020T-01 |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 32 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

50-Pin I-PEX 20453 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
50-position 0.5 mm pitch 36 AWG precision eDP assembly engineered with I-PEX 20453 and I-PEX 20453 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453 |
|---|---|
| Connector B | I-PEX 20453 |
| Pin / Pitch | 50 Pin / 0.5 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 50Ω |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin I-PEX 20453-040T to I-PEX 20453-030T 0.5 mm eDP Harness
40-position 0.5 mm pitch 32 AWG precision eDP assembly engineered with I-PEX 20453-040T and I-PEX 20453-030T terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-040T |
|---|---|
| Connector B | I-PEX 20453-030T |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 32 AWG |
| Cable Length | 350 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin I-PEX 20453-040T-01 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20453-040T-01 and I-PEX 20453-040T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-040T-01 |
|---|---|
| Connector B | I-PEX 20453-040T-01 |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

30-Pin Hirose DF36 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36 and Hirose DF36 terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36 |
|---|---|
| Connector B | Hirose DF36 |
| Pin / Pitch | 30 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin 30-Pin 0.5 mm Vertical eDP Micro-Coax 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with 30-Pin 0.5 mm Vertical eDP Micro-Coax and 30-Pin 0.5 mm Vertical eDP Micro-Coax terminations for industrial display and high-speed imaging links.
| Connector A | 30-Pin 0.5 mm Vertical eDP Micro-Coax |
|---|---|
| Connector B | 30-Pin 0.5 mm Vertical eDP Micro-Coax |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 50Ω |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

30-Pin 30-Pin 0.5mm Pitch SMT Header (Vertical Mount) to 50-Pin 0.5mm Pitch SMT Header (Right-Angle Mount) 0.5 mm eDP Harness
30-position 0.5 mm pitch 36 AWG precision eDP assembly engineered with 30-Pin 0.5mm Pitch SMT Header (Vertical Mount) and 50-Pin 0.5mm Pitch SMT Header (Right-Angle Mount) terminations for industrial display and high-speed imaging links.
| Connector A | 30-Pin 0.5mm Pitch SMT Header (Vertical Mount) |
|---|---|
| Connector B | 50-Pin 0.5mm Pitch SMT Header (Right-Angle Mount) |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

30-Pin 40-pin fine pitch SMT connector (0.5mm pitch) to Combination 7-pin + 51-pin board-to-board 0.5 mm eDP Harness
30-position 0.5 mm pitch 34 AWG precision eDP assembly engineered with 40-pin fine pitch SMT connector (0.5mm pitch) and Combination 7-pin + 51-pin board-to-board terminations for industrial display and high-speed imaging links.
| Connector A | 40-pin fine pitch SMT connector (0.5mm pitch) |
|---|---|
| Connector B | Combination 7-pin + 51-pin board-to-board |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 34 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100Ω ±10% (typical LVDS) |
| Shielding | 360° Conductive Foil + Acetate Wrap |

41-Pin 41-pin, 0.5mm pitch, vertical SMT connector to 30-pin, 0.5mm pitch 0.5 mm eDP Harness
41-position 0.5 mm pitch 32 AWG precision eDP assembly engineered with 41-pin, 0.5mm pitch, vertical SMT connector and 30-pin, 0.5mm pitch terminations for industrial display and high-speed imaging links.
| Connector A | 41-pin, 0.5mm pitch, vertical SMT connector |
|---|---|
| Connector B | 30-pin, 0.5mm pitch |
| Pin / Pitch | 41 Pin / 0.5 mm |
| Wire Gauge | 32 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

40-Pin I-PEX 20453-240T-01 to JAE FI-RE51CL 0.5 mm eDP Harness
40-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20453-240T-01 and JAE FI-RE51CL terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-240T-01 |
|---|---|
| Connector B | JAE FI-RE51CL |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

30-Pin 30-Pin 0.5 mm Vertical eDP Micro-Coax 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.5 mm pitch 44 AWG precision eDP assembly engineered with 30-Pin 0.5 mm Vertical eDP Micro-Coax and 30-Pin 0.5 mm Vertical eDP Micro-Coax terminations for industrial display and high-speed imaging links.
| Connector A | 30-Pin 0.5 mm Vertical eDP Micro-Coax |
|---|---|
| Connector B | 30-Pin 0.5 mm Vertical eDP Micro-Coax |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 44 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

30-Pin 30-Pin 0.5 mm Vertical eDP Micro-Coax 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with 30-Pin 0.5 mm Vertical eDP Micro-Coax and 30-Pin 0.5 mm Vertical eDP Micro-Coax terminations for industrial display and high-speed imaging links.
| Connector A | 30-Pin 0.5 mm Vertical eDP Micro-Coax |
|---|---|
| Connector B | 30-Pin 0.5 mm Vertical eDP Micro-Coax |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

50-Pin I-PEX 20454-050E 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
50-position 0.5 mm pitch 38 AWG precision eDP assembly engineered with I-PEX 20454-050E and I-PEX 20454-050E terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20454-050E |
|---|---|
| Connector B | I-PEX 20454-050E |
| Pin / Pitch | 50 Pin / 0.5 mm |
| Wire Gauge | 38 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 50Ω |
| Shielding | EMI Foil / Braided Shield + Tape Wrap |

40-Pin JAE HD1P040-CSH2 to JAE HD1P040MA1 0.5 mm eDP Harness
40-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with JAE HD1P040-CSH2 and JAE HD1P040MA1 terminations for industrial display and high-speed imaging links.
| Connector A | JAE HD1P040-CSH2 |
|---|---|
| Connector B | JAE HD1P040MA1 |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 50 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin I-PEX 20531-030T-01 to I-PEX 20531-040T-01 0.25 mm eDP Harness
40-position 0.25 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20531-030T-01 and I-PEX 20531-040T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20531-030T-01 |
|---|---|
| Connector B | I-PEX 20531-040T-01 |
| Pin / Pitch | 40 Pin / 0.25 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin Hirose DF80D 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with Hirose DF80D and Hirose DF80D terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF80D |
|---|---|
| Connector B | Hirose DF80D |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

15-Pin Hirose DF36C-15P-0.4SD to DC-2813C 0.4 mm eDP Harness
15-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36C-15P-0.4SD and DC-2813C terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36C-15P-0.4SD |
|---|---|
| Connector B | DC-2813C |
| Pin / Pitch | 15 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

50-Pin Hirose DF36C-50P-0.4SD to DC-2813C 0.4 mm eDP Harness
50-position 0.4 mm pitch 46 AWG precision eDP assembly engineered with Hirose DF36C-50P-0.4SD and DC-2813C terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36C-50P-0.4SD |
|---|---|
| Connector B | DC-2813C |
| Pin / Pitch | 50 Pin / 0.4 mm |
| Wire Gauge | 46 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20453-230T-03 to Kel Usl20-30s 0.5 mm eDP Harness
30-position 0.5 mm pitch 36 AWG precision eDP assembly engineered with I-PEX 20453-230T-03 and Kel Usl20-30s terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-230T-03 |
|---|---|
| Connector B | Kel Usl20-30s |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

15-Pin Hirose DF36-15P 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
15-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36-15P and Hirose DF36-15P terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36-15P |
|---|---|
| Connector B | Hirose DF36-15P |
| Pin / Pitch | 15 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

50-Pin I-PEX 20380-R30T-06 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
50-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20380-R30T-06 and I-PEX 20380-R30T-06 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20380-R30T-06 |
|---|---|
| Connector B | I-PEX 20380-R30T-06 |
| Pin / Pitch | 50 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

60-Pin I-PEX 20633-260-01S 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
60-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20633-260-01S and I-PEX 20633-260-01S terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20633-260-01S |
|---|---|
| Connector B | I-PEX 20633-260-01S |
| Pin / Pitch | 60 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20380-R30T-06 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20380-R30T-06 and I-PEX 20380-R30T-06 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20380-R30T-06 |
|---|---|
| Connector B | I-PEX 20380-R30T-06 |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20453-330T-13 to I-PEX 20453-340T-13 0.5 mm eDP Harness
30-position 0.5 mm pitch 44 AWG precision eDP assembly engineered with I-PEX 20453-330T-13 and I-PEX 20453-340T-13 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20453-330T-13 |
|---|---|
| Connector B | I-PEX 20453-340T-13 |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 44 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20679 to I-PEX 20679-030T-01 0.4 mm eDP Harness
30-position 0.4 mm pitch 34 AWG precision eDP assembly engineered with I-PEX 20679 and I-PEX 20679-030T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20679 |
|---|---|
| Connector B | I-PEX 20679-030T-01 |
| Pin / Pitch | 30 Pin / 0.4 mm |
| Wire Gauge | 34 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin I-PEX 20679-040T-01 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.4 mm pitch 34 AWG precision eDP assembly engineered with I-PEX 20679-040T-01 and I-PEX 20679-040T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20679-040T-01 |
|---|---|
| Connector B | I-PEX 20679-040T-01 |
| Pin / Pitch | 40 Pin / 0.4 mm |
| Wire Gauge | 34 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

60-Pin I-PEX 20790-060E-02 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
60-position 0.4 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20790-060E-02 and I-PEX 20790-060E-02 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20790-060E-02 |
|---|---|
| Connector B | I-PEX 20790-060E-02 |
| Pin / Pitch | 60 Pin / 0.4 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Full EMI Shield + Metal Shell |

30-Pin I-PEX 20679-030T-01 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.4 mm pitch 40 AWG precision eDP assembly engineered with I-PEX 20679-030T-01 and I-PEX 20679-030T-01 terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20679-030T-01 |
|---|---|
| Connector B | I-PEX 20679-030T-01 |
| Pin / Pitch | 30 Pin / 0.4 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

20-Pin I-PEX 20679-20P 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
20-position 0.4 mm pitch 36 AWG precision eDP assembly engineered with I-PEX 20679-20P and I-PEX 20679-20P terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20679-20P |
|---|---|
| Connector B | I-PEX 20679-20P |
| Pin / Pitch | 20 Pin / 0.4 mm |
| Wire Gauge | 36 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

25-Pin Hirose DF36-25P-0.4SD 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
25-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36-25P-0.4SD and Hirose DF36-25P-0.4SD terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36-25P-0.4SD |
|---|---|
| Connector B | Hirose DF36-25P-0.4SD |
| Pin / Pitch | 25 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin I-PEX 20454-030 to Kel Ssl20-30s 0.5 mm eDP Harness
30-position 0.5 mm pitch 46 AWG precision eDP assembly engineered with I-PEX 20454-030 and Kel Ssl20-30s terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20454-030 |
|---|---|
| Connector B | Kel Ssl20-30s |
| Pin / Pitch | 30 Pin / 0.5 mm |
| Wire Gauge | 46 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

12-Pin I-PEX 20633-312T-01S to Honda L 0.5 mm eDP Harness
12-position 0.5 mm pitch 38 AWG precision eDP assembly engineered with I-PEX 20633-312T-01S and Honda L terminations for industrial display and high-speed imaging links.
| Connector A | I-PEX 20633-312T-01S |
|---|---|
| Connector B | Honda L |
| Pin / Pitch | 12 Pin / 0.5 mm |
| Wire Gauge | 38 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin JAE FI-JH40C-B to JAE HD1P040MA1 0.5 mm eDP Harness
40-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with JAE FI-JH40C-B and JAE HD1P040MA1 terminations for industrial display and high-speed imaging links.
| Connector A | JAE FI-JH40C-B |
|---|---|
| Connector B | JAE HD1P040MA1 |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

50-Pin Hirose DF36-50P 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
50-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36-50P and Hirose DF36-50P terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36-50P |
|---|---|
| Connector B | Hirose DF36-50P |
| Pin / Pitch | 50 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

26-Pin Hirose DF56C-26S-0.3V 0.3 mm Pitch eDP Micro-Coaxial Cable Assembly
26-position 0.3 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF56C-26S-0.3V and Hirose DF56C-26S-0.3V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF56C-26S-0.3V |
|---|---|
| Connector B | Hirose DF56C-26S-0.3V |
| Pin / Pitch | 26 Pin / 0.3 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin Hirose DF38 to Hirose DF38A-30S-0.3V 0.3 mm eDP Harness
30-position 0.3 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF38 and Hirose DF38A-30S-0.3V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF38 |
|---|---|
| Connector B | Hirose DF38A-30S-0.3V |
| Pin / Pitch | 30 Pin / 0.3 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin Hirose DF38 to Hirose DF38A-32S-0.3V 0.3 mm eDP Harness
30-position 0.3 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF38 and Hirose DF38A-32S-0.3V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF38 |
|---|---|
| Connector B | Hirose DF38A-32S-0.3V |
| Pin / Pitch | 30 Pin / 0.3 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

25-Pin Hirose DF36-25P 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
25-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36-25P and Hirose DF36-25P terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36-25P |
|---|---|
| Connector B | Hirose DF36-25P |
| Pin / Pitch | 25 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 150 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

30-Pin Hirose DF56-30P-0.3SD 0.3 mm Pitch eDP Micro-Coaxial Cable Assembly
30-position 0.3 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF56-30P-0.3SD and Hirose DF56-30P-0.3SD terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF56-30P-0.3SD |
|---|---|
| Connector B | Hirose DF56-30P-0.3SD |
| Pin / Pitch | 30 Pin / 0.3 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin Hirose DF80-40P-0.5SD 0.5 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.5 mm pitch 40 AWG precision eDP assembly engineered with Hirose DF80-40P-0.5SD and Hirose DF80-40P-0.5SD terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF80-40P-0.5SD |
|---|---|
| Connector B | Hirose DF80-40P-0.5SD |
| Pin / Pitch | 40 Pin / 0.5 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

15-Pin Hirose DF36A-15S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
15-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-15S-0.4V and Hirose DF36A-15S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-15S-0.4V |
|---|---|
| Connector B | Hirose DF36A-15S-0.4V |
| Pin / Pitch | 15 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

50-Pin Hirose DF36A-50S-0.4V 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
50-position 0.4 mm pitch 42 AWG precision eDP assembly engineered with Hirose DF36A-50S-0.4V and Hirose DF36A-50S-0.4V terminations for industrial display and high-speed imaging links.
| Connector A | Hirose DF36A-50S-0.4V |
|---|---|
| Connector B | Hirose DF36A-50S-0.4V |
| Pin / Pitch | 50 Pin / 0.4 mm |
| Wire Gauge | 42 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |

40-Pin KEL Usl00-40L 0.4 mm Pitch eDP Micro-Coaxial Cable Assembly
40-position 0.4 mm pitch 40 AWG precision eDP assembly engineered with KEL Usl00-40L and KEL Usl00-40L terminations for industrial display and high-speed imaging links.
| Connector A | KEL Usl00-40L |
|---|---|
| Connector B | KEL Usl00-40L |
| Pin / Pitch | 40 Pin / 0.4 mm |
| Wire Gauge | 40 AWG |
| Cable Length | 250 mm (Custom Lengths Available) |
| Impedance | 100 Ω ±5% Differential |
| Shielding | 360° Conductive Foil + Acetate Wrap |
Manufacturing Precision & Electrical Validation
High-speed eDP lanes operate from 1.62 Gbps (RBR) up to 10 Gbps per lane (UHBR10). Every HiFlexlinK assembly is verified for mechanical retention, dielectric integrity, and controlled impedance.
100% Continuity & Hi-Pot
Automated netlist verification screens for opens, shorts, miswires, and insulation breakdown at 250–500 VDC prior to shipment.
Pull-Force Retention
Calibrated crimp and micro-coaxial solder-bar pull testing ensures zero conductor back-out under industrial vibration.
TDR & Insertion Loss
Time-Domain Reflectometry verifies 100 Ω ±5% differential impedance and skew matching across high-speed differential pairs.
RoHS 3, REACH & Flexible MOQ
Full material compliance using UL-listed FEP/PFA micro-coax with prototype runs starting at 5 pieces and scalable OEM production.

Engineering Selection FAQ
Technical guidance on connector compatibility, micro-coaxial wire gauge selection, EMI shielding, and prototype turnaround.
Are HiFlexlinK HFL-series eDP assemblies pin-for-pin compatible with I-PEX, Hirose, JAE, and KEL receptacles?
Yes. HiFlexlinK fabricates assemblies using genuine OEM housings, shells, and gold-plated contacts—or verified mechanical-lock equivalents upon engineering approval—matched to standard VESA eDP pinouts as well as custom OEM pin-to-pin maps.
What is the typical lead time for custom-length eDP prototypes and production orders?
Standard custom engineering prototypes have a rapid turnaround lead time of 5 to 7 days, with scalable options available for full OEM production runs.
How should engineers choose between 40 AWG, 42 AWG, and 44 AWG micro-coaxial conductors?
Wire gauge selection is tuned based on your specific requirements for mechanical bend radius, physical routing constraints, and the signal attenuation budget of your high-speed display link.
What electrical and mechanical tests are performed on every HiFlexlinK eDP cable harness?
Every assembly undergoes 100% Continuity & Hi-Pot testing (screening for opens, shorts, and insulation breakdown at 250–500 VDC), pull-force retention testing for mechanical reliability under vibration, and Time-Domain Reflectometry (TDR) testing to verify 100 $\Omega$ $\pm$5% differential impedance and skew matching.
Can you integrate auxiliary power, I2C, or cross-series adapters into a single eDP hybrid harness?
Yes, custom hybrid harnesses can be engineered to combine display signals with auxiliary power lines, I2C communication, or cross-series adapter architectures into a single assembly.
