Custom Cable Assemblies & Precision Micro-Coaxial Wire Harnesses
Custom Cable Assemblies & Precision Micro-Coaxial Wire Harnesses
End-to-end OEM/ODM custom cable assembly and wire harness manufacturer. From 0.25 mm ultra-fine pitch eDP and MIPI CSI-2 micro-coaxial harnesses to 40Gbps USB4/Thunderbolt 4 and rugged Molex/JST power interconnects—100% TDR impedance and Hi-Pot tested.
Explore Custom Cable Assembly Series
Select a dedicated interconnect family below to view technical parameters, pinout configurations, and cross-reference SKUs.
Embedded DisplayPort (eDP) Micro-Coaxial Assemblies
Ultra-fine pitch micro-coax harnesses engineered for 4K/8K OLED micro-displays, industrial panels, and gaming laptops.
- Pitch & Gauge: 0.25–1.25 mm pitch · 38–44 AWG
- Signal Integrity: 100 Ω ±5% differential impedance · 360° EMI shield
- Mating Brands: I-PEX CABLINE-VS/CA, Hirose DF36/DF80, JAE, KEL
Custom MIPI CSI-2 & C-PHY Camera Cable Assemblies
Low-attenuation, ultra-flexible coaxial camera links built for UAV drone gimbals, surgical endoscopes, and AI vision sensors.
- Pitch & Gauge: 0.30–0.50 mm pitch · #36–#48 AWG
- RF Performance: ≤0.3 dB/cm @ 5GHz · High-flex PFA jacket
- Mating Brands: I-PEX 20345/20846, Hirose DF56, KEL USL20, HDZero
KEL USL / USLS & 56Gbps PAM4 Micro-Coax Hub
100% drop-in compatible replacements for KEL USL20/USLS20 30P & 40P connectors with ZenShield®-equivalent 360° EMI grounding.
- Geometry: 0.4 mm pitch · 1.0 mm ultra-low mated height
- Durability: >250,000 cyclic bends @ R=5mm · MIL-STD-202G
- Standard SKUs: 14 pre-engineered pinout configurations
Precision USB4 & Thunderbolt 4 Cable Assemblies
Full-featured bidirectional 40Gbps Type-C cable assemblies supporting 8K video, PCIe tunneling, and EPR 240W charging.
- Bandwidth & Power: 40 Gbps · 48V/5A (240W) USB PD 3.1
- Impedance: 90 Ω ±5% controlled differential pairs
- Configurations: Male-to-Male, Panel-Mount Extension, Micro-Coax
Custom Molex Cable Assemblies & Wire Harnesses
Precision-crimped discrete wire harnesses using genuine and drop-in Molex housings for industrial control, EVs, and power distribution.
- Pitch & Gauge: 1.25–5.70 mm pitch · 14–30 AWG (UL1007/1015/Silicone)
- Supported Series: PicoBlade, Micro-Fit 3.0, Nano-Fit, Mini-Fit Jr., Mega-Fit
- Catalog: 34 standard configurations + custom cross-brand pinning
Custom JST Wire Harness & Cable Assembly Solutions
High-reliability micro-pitch and power JST harnesses engineered for robotics, battery management systems (BMS), and compact electronics.
- Pitch & Current: 0.50–3.96 mm pitch · 18–36 AWG · 0.2A–13A
- Supported Series: JST XH, PH, ZH, SH/SHLP, ACH, FWG, XSR, VH
- Catalog: 33 standard assemblies & JST-to-Molex/Dupont adapters
Engineered for Mission-Critical Applications
Direct interconnect recommendations tailored to your target operating environment.
Medical Imaging & Endoscopy
42–46 AWG ultra-flexible PFA coaxial links for surgical endoscopes, mammography DR systems, and dental 3D scanners.
UAV Drones & Robotics
Vibration-qualified (MIL-STD-202G) gimbal camera cables and high-flex drag chain harnesses rated over 250,000 cycles.
Automotive Cockpit & ADAS
Extended temperature (-40°C to +105°C) HSD/USB 3.0 infotainment harnesses, laser projection links, and positive-lock connectors.
Industrial & Energy Storage (ESS)
High-current Mega-Fit/Mini-Fit power harnesses, IP67 overmolded waterproof cables, and ESS battery aging test leads.
HiFlexlinK Unified Part Number Architecture
Example: HFL – VS – 040P – 05 – 42AWG (Custom Overmolding, Y-Splitters & Cross-Brand Pinouts Supported)
HFL
HiFlexlinK Certified Precision Assembly
SERIES
Connector Family (e.g., VS, USL20, DF56, PB5102, XHP, TB4)
PINS
Contact Count (02P up to 50P High-Density)
PITCH
Centerline Spacing (0.25mm to 5.70mm)
AWG / MOLD
#36–#48 Micro-Coax or 14–30 AWG + PVC/TPE/TPU Overmold
Start Your Custom Cable Project
Send us your 2D drawing, pinout table, or connector part numbers. Our engineering team provides complimentary DFM review, TDR impedance simulation, and quotes within 24 hours.
- Direct Engineering Email: sales@rf-coaxial.com
- WhatsApp / Instant Tech Support: +86 130 7684 7815
- Complete Capability Brochure: Custom-Cable-Assembly-and-Overmolding.pdf
Quick Inquiry Checklist for Fast Quote:
- End A & End B Connector Part Numbers (or Pitch & Pin Count)
- Wire Gauge (e.g., 42 AWG Micro-Coax or 22 AWG UL1007)
- Overall Cable Length (mm) & Pin-to-Pin Wiring Diagram
- Overmolding, Braiding, or Ferrite Core Requirements
- Prototype & Mass Production Target Quantities
