Our high-performance phase stable coaxial cables are engineered for demanding RF, microwave, and millimeter-wave (mmWave) applications where signal integrity, minimal phase change versus bending (Phase vs Flexure), and phase stability vs temperature are critical. Covering frequency ranges from DC up to 110 GHz, these cable assemblies offer low insertion loss, low VSWR, high shielding effectiveness (>90 dB), and extended flex life for field testing, radar systems, phased array antennas, and satellite communications.
Designed as direct drop-in equivalents for industry-standard series from Huber+Suhner, Gore, and Micro-Coax, we offer both standard lengths and custom RF cable assembly solutions built to your exact specifications.
Superior Phase Stability vs Flexure: Utilizes advanced microporous LD-PTFE and solid PTFE dielectrics to achieve minimal phase drift (±0.2° ~ ±0.3°/GHz) under repeated bending.
Phase Stability Over Temperature: Mitigates the “PTFE knee” effect, maintaining ultra-stable electrical performance across wide thermal ranges (-55°C to +125°C).
Ultra-Broadband Coverage: Precision assemblies supporting DC to 18 GHz, 40 GHz, 67 GHz, and up to 110 GHz with minimal attenuation.
High Shielding & Durability: Triple-shielded structures ensure >90 dB shielding effectiveness, wrapped in high-abrasion PUR, FEP, or armored jackets for harsh environments
Choose the right phase stable RF cable assembly based on your required operating frequency, dielectric material, and phase performance:
| Model / Series | Max Frequency | Dielectric Type | Phase vs Flexure | Key Applications |
|---|---|---|---|---|
| PS160L / PS150L / PS180 Series | 67 GHz – 110 GHz | Microporous LD-PTFE / Solid PTFE | ±0.2° ~ ±0.3° / GHz | mmWave testing, 110GHz analyzers, high-density modules |
| PS265L / PS310L / PS360L Series | 40 GHz – 61 GHz | Low Density PTFE (LD-PTFE) | ±3.0° @ 40GHz (360° wrap) | 5G/6G R&D, satellite communications, laboratory test leads |
| PS420LS / PS500L / PS540L Series | 25 GHz – 34 GHz | Solid PTFE / Low Density PTFE | High durability / Flexible PUR/FEP | Aerospace radar, dynamic flex applications, military RF |
| PS560L / PS760L / PS930L Series | DC – 18 GHz | Solid PTFE | Low VSWR (<1.25) | High power transmission, interconnects, general RF testing |
Looking for a drop-in equivalent or cost-effective replacement for industry-standard phase stable cables? Check our cross-reference compatibility below:
| Industry Brand & Model | Our Equivalent Series | Form Factor & Features |
|---|---|---|
| HUBER+SUHNER Minibend-047 / Minibend-086L | PS160L / PS260L Series | Ultra-compact, flexible mmWave phase stable cable |
| Gore CXN3500 / CXN3449 | PS360L / PS500L Series | Low loss, high phase stability over flexure & temperature |
| Micro-Coax FA147A | PS310L / PS400L Series | Triple-shielded, low attenuation phase matched leads |
| HUBER+SUHNER SUCOFLEX 126E | PS420LS / PS540L Series | Ruggedized test cable assemblies for harsh environments |
A phase stable coaxial cable maintains a constant electrical length (and phase response) when subjected to physical bending, twisting, or temperature fluctuations. Standard cables suffer from phase drift due to dielectric deformation, which distorts phase-critical measurements in phased-array radars, vector network analyzers (VNAs), and beamforming systems.
Standard Solid PTFE dielectrics undergo a phase transition (known as the “PTFE knee”) near room temperature (~19°C), causing abrupt changes in phase length. Our high-frequency series (such as LD-PTFE models) use microporous PTFE dielectrics to mitigate this phenomenon, providing a near-linear phase change over a wide thermal operating range (-55°C to +125°C).
Yes. Our phase stable cable series are designed as direct, drop-in replacements for major industry brands including Huber+Suhner, Gore, and Micro-Coax, matching mechanical bend radii, connector interfaces, and RF performance specs.
A: For frequencies above 67 GHz up to 110 GHz, selecting cables with microporous LD-PTFE dielectrics and ultra-small outer diameters (such as 1.5mm to 1.8mm) is essential to minimize insertion loss and maintain strict phase stability under tight bend radii.
A: Yes. Our cable series match the electrical specifications, mechanical form factors, and connector interfaces (1.0mm, 1.85mm, 2.4mm, 2.92mm, SMA) of standard series like Huber+Suhner Minibend/SUCOFLEX and Gore CXN, providing a reliable, cost-effective drop-in alternative
PS1500L-8G High Frequency Low Loss Phase Stable Coaxial Cable Ultra-Low Insertion Loss & Exceptional Phase Stability Rated Up to 8 GHz Engineered for high-frequency RF systems, the PS1500L-8G features expanded LD-PTFE dielectric insulation, silver-plated copper inner conductor, and triple shielding structure for maximum signal integrity, phase stability during flexure, and superior power handling performance.. Max…
PS180-100G 100 GHz Ultra-High Frequency Phase Stable Coaxial Cable 100 GHz Sub-THz Micro-Miniature Flexible Coaxial Cable Engineered for ultra-high frequency test systems, millimeter-wave modules, and high-density probe cards operating up to 100 GHz. The PS180-100G incorporates a micro 1.80mm outer diameter with triple-layer shielding, ensuring tight bending performance and high Phase Stability vs. Flexure. Max…
PS260-40G High Frequency Phase Stable Coaxial Cable 40 GHz High Frequency Low Loss Phase-Stable Coaxial Cable Engineered for demanding high-frequency RF applications, microwave instrumentation, and telecommunications, the PS260-40G incorporates a solid PTFE dielectric and a robust triple-shielded outer layer, providing excelente mechanical flexibility, high phase stability vs. bending, and low interference up to 40 GHz….
PS265L-50G High Frequency Phase Stable Coaxial Cable 50 GHz Ultra-High Frequency Low Loss Phase-Stable Coaxial Cable Designed for demanding RF testing, microwave instrumentation, and high-frequency communication systems, the PS265L-50G features a low-density PTFE (LD-PTFE) dielectric and a robust triple-shielded structure, delivering superior phase stability versus bending and ultra-low insertion loss up to 50 GHz. Max…
PS400-26.5G High Frequency Phase Stable Coaxial Cable (26.5GHz) 26.5Ghz Minibend-141 replacable High Frequency Low Loss Phase Stable Coaxial Cable The PS400-26.5G is a robust 50 Ohm flexible coaxial cable designed for high-frequency RF applications up to 26.5 GHz. Built with a solid PTFE dielectric and triple shielding, it ensures consistent phase stability during flexure, outstanding…
PS400L-34G High Frequency Low Loss Phase Stable Cable (34GHz) 34Ghz Minibend-141 High Frequency Low Loss Phase Stable Coaxial Cable The PS400L-34G is a high-performance 50 Ohm flexible coaxial cable engineered for demanding RF applications up to 34 GHz. Constructed with low-density LD-PTFE dielectric and triple-layer shielding, it delivers exceptional phase stability under bending, low insertion…
PSE360L-40G-F High Frequency Low Loss Phase Stable Cable (40GHz) 40Ghz High Frequency Low Loss Phase Stable Coaxial Cable The PSE360L-40G-F is an ultra-high performance 50 Ohm flexible coaxial cable engineered for demanding RF applications up to 40 GHz. Designed with a low-density ZF402 dielectric and triple-layer shielding, it delivers exceptional phase stability against temperature fluctuations…
PS450K-26.5G Phase Stable Low Loss RF Coaxial Cable DC–26.5 GHz | Triple Shielded | High Phase Stability Robust 4.50mm RF coaxial cable featuring a solid inner conductor, high-temperature aluminium foil interlayer, and multi-layer shielding engineered for rigorous test environments, radar links, and aerospace RF infrastructure up to 26.5 GHz Max Frequency:26.5 GHz Screening: >90 dB…
PS360L-61G-FP Phase Stable Low Loss RF Coaxial Cable DC–61 GHz | Ultra Low Loss | Phase Stable Design Precision 3.60mm microwave coaxial cable engineered for high-frequency test systems, millimeter-wave communications, and radar systems requiring exceptional phase stability and low insertion loss up to 61 GHz. Max Frequency: 61 GHz Screening: >90 dB Velocity of Prop.:…
PS460L-40G Phase Stable Low Loss RF Coaxial Cable DC–40 GHz | Low Loss | Superior Phase Stability High-precision 4.60mm RF coaxial cable optimized for broadband test and measurement, aerospace radar, and high-frequency microwave systems requiring exceptionally low insertion loss and stable phase characteristics up to 40 GHz. Max Frequency: 40 GHz Screening: >90 dB Velocity…